라즈베리 파이 4B 데스크탑 케이스(Raspberry pi 4B desktop case with ups)
ROQKFWK
·
2021-10-20 16:13 ·
조회 2237 ·
생활용품
조회수
2237
다운로드
3
파일명
Raspberrypi4Bdesktopcasewithups.zip
상세정보
출처 : https://www.thingiverse.com/thing:4967853
Summary
This is a small case for Raspberry Pi, which supports UPS, cooling fan, memory card insertion and removal, and battery removal. The size is 92 * 92 * 60mm
If you want to make this case, you need to prepare the following materials, of course I also gave a list of materials:
Non-printable parts | Quantity | Remark |
---|---|---|
Raspberry Pi 4B | 1 | Buy it yourself |
Raspberry Pi cooling tower | 1 | Used for Raspberry Pi heat dissipation, horizontal fan can effectively save space |
Raspberry Pi UPS PLUS | 1 | Don’t buy it wrong, buy this one under the Raspberry Pi |
0.96 inch oled | 1 | Used to display |
M2.5mm nut | 4 | For top fixing |
M2 x 3mm hexagon socket screw | 4 | For 0.96 inch oled fixing |
M2.5 x 8mm hexagon socket screws | 12 | Used to fix the side screen * 8 Used to fix the bottom acrylic * 4 It can also be used to fix M2.5 * 14 copper pillars * 2 |
M2.5 x 6 + 6mm copper pillar | 4 | For the cooling tower of the Raspberry Pi, you can use the built-in screws |
M2.5 x 7 + 6mm copper pillar | 4 | For UPS for Raspberry Pi, you can use the built-in screws |
M2.5 x 14mm double pass copper post | 2 | M2.5 * 14+4 copper pillars can be used instead. Considering that there are fewer copper pillars, double-pass copper pillars are recommended |
M2.5 x 20mm double pass copper post | 2 | The UPS is fixed at the bottom, which can be replaced by M2.5 * 20+6. Double-tube copper columns are recommended for easy installation |
M3 x 10mm hexagon socket screw | 4 | Used to fix the cooling fan on the top |
I will post a video later
Print Settings
Printer brand:
Printer:
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
70+
Filament brand:
Sanlv
Filament color:
grey
Filament material:
PLA
How I Designed This
How to make
A long time ago I saw a Raspberry Pi video, oh, here Raspberry Pi 3,4 - Gaming Case, and then I’m special I want to be a small computer of my own, I bought a Raspberry Pi and put it there to eat ashes, until I saw this Mini Raspberry Pi Server With Built In UPS, I have watched the video, but this file is chargeable, and I found that many people are saying why not speak from below, I was thinking , This attention is really good. Mini Desktop Case for Raspberry Pi 4 with Makerbase "UPS" 18650 Power Supply, I have seen this too, but I found out that it needs screws assemble, and it’s not It's transparent enough.
Feeling the inspiration they gave me, I started designing by myself. All the parameters are measured and printed again and again by myself, and then recalibrated. You can see my picture, the long row, all failed or there is questionable.
The initial design was that the oled and micro sd card were placed in the front, and it was found that the radiator and the oled would conflict, and then the position was adjusted.
At the beginning, the battery at the bottom could not be taken out. I knew that once the UPS Plus could not be shut down inexplicably, pressing the side switch did not work. There were indeed some problems. Then I quickly mentioned the function of taking the battery to emergency. If this problem occurs next time, I will have to remove all the screws and try again. It is really troublesome.