메뉴 닫기

탁구공(Airless Ping Pong Ball 2.0)

sniii sniii · 2024-05-30 11:15 · 조회 240 · 스포츠
라이선스
CC BY-SA(저작자표시-동일조건변경허락)
제작여부
출처에서 가져옴
출처
싱기버스
기타
by E_T_
조회수
240
다운로드
4
파일명
Airless-Ping-Pong-Ball-2.0-6576976.zip
상세정보

출처: https://www.thingiverse.com/thing:6576976
Summary





NEW 3.0 version now available on MakerWorld!
https://makerworld.com/en/models/426056

3.0 version also available with a commercial license here:
https://cults3d.com/en/3d-model/game/airless-ping-pong-ball-3-0

This is the 2.0 version:

Now with more bounce, stronger, thicker, more fun!

Prints without supports for easier post processing. Print with a 5mm brim, 10mm if you have adhesion issues.

For best results, print in PETG, or a tough PLA! ABS also holds up well. Regular PLA tends to crack easily, try a FPLA instead if you have access.

Brim IS necessary. If you are having adhesion issues, clean build plate with alcohol and increase brim to 10mm.