메뉴 닫기

닌자 스타 냉장고 자석(Ninja Star Fridge Magnet)

sniii sniii · 2024-06-27 09:55 · 조회 101 · 피규어/토이
라이선스
CC BY-SA(저작자표시-동일조건변경허락)
제작여부
출처에서 가져옴
출처
싱기버스
기타
by jon56699
조회수
101
다운로드
0
파일명
Ninja-Star-Fridge-Magnet-6651273.zip
상세정보


출처: https://www.thingiverse.com/thing:6651273

Summary




This is just a fun little fridge magnet I designed. Make it look like the Foot Clan left messages.

Whole ninja star has also been uploaded so you can use a little slight of hand to pretend you threw it.

After printing you will need a pair of neodymium magnets. I used 2mm thick magnets. Files are available for 3mm, 4mm and 5mm diameters.

I printed these standing up with a skirt and support. It is probably possible and maybe even better to print them laying flat.

Happy printing.





Print Settings

  • Printer brand:



    Creality


  • Printer:



    Ender 3


  • Rafts:
    Yes
  • Supports:
    Yes
  • Resolution:
    0.2mm
  • Infill:
    10%
  • Filament brand:



    Elegoo


  • Filament color:



    Gray


  • Filament material:



    PLA


  • Notes:



    This print is tilted 5 degrees from vertical. It may look incorrect in the slicer, but it is not.




Post-Printing




This fridge magnet is meant to have (2) neodymium magnets with a thickness of 2mm. Files have been uploaded for 3mm, 4mm and 5mm diameters.

I set mine using basic super glue.

Do yourself a favor and wait at least 5 minutes after gluing to test this on a metal surface.