라즈베리 파이 4B 데스크탑 케이스(Raspberry pi 4B desktop case with ups)

ROQKFWK · 2021-10-20 16:13 · 조회 2226 · 생활용품

작업프로그램

기타(etc)

라이선스

CC BY-NC-SA(저작자표시-비영리-동일조건변경허락)

제작여부

출처에서 가져옴

출처

Thingiverse

기타

by mofada

조회수

2226

다운로드

파일명

Raspberrypi4Bdesktopcasewithups.zip

상세정보

출처 : https://www.thingiverse.com/thing:4967853

Summary

This is a small case for Raspberry Pi, which supports UPS, cooling fan, memory card insertion and removal, and battery removal. The size is 92 * 92 * 60mm

If you want to make this case, you need to prepare the following materials, of course I also gave a list of materials:

Non-printable parts	Quantity	Remark
Raspberry Pi 4B	1	Buy it yourself
Raspberry Pi cooling tower	1	Used for Raspberry Pi heat dissipation, horizontal fan can effectively save space
Raspberry Pi UPS PLUS	1	Don’t buy it wrong, buy this one under the Raspberry Pi
0.96 inch oled	1	Used to display
M2.5mm nut	4	For top fixing
M2 x 3mm hexagon socket screw	4	For 0.96 inch oled fixing
M2.5 x 8mm hexagon socket screws	12	Used to fix the side screen * 8 Used to fix the bottom acrylic * 4 It can also be used to fix M2.5 * 14 copper pillars * 2
M2.5 x 6 + 6mm copper pillar	4	For the cooling tower of the Raspberry Pi, you can use the built-in screws
M2.5 x 7 + 6mm copper pillar	4	For UPS for Raspberry Pi, you can use the built-in screws
M2.5 x 14mm double pass copper post	2	M2.5 * 14+4 copper pillars can be used instead. Considering that there are fewer copper pillars, double-pass copper pillars are recommended
M2.5 x 20mm double pass copper post	2	The UPS is fixed at the bottom, which can be replaced by M2.5 * 20+6. Double-tube copper columns are recommended for easy installation
M3 x 10mm hexagon socket screw	4	Used to fix the cooling fan on the top

Among them, it is recommended to use acrylic(3mm) for the side and bottom plates, which will look good. I also provided the dwg file for acrylic cutting. Then the side panel will be very monotonous because of the blank, you can engrave some patterns on it, just like me.

I will post a video later

Print Settings

Printer brand:

Anycubic

Printer:

All-metal Mega

Rafts:

Supports:

Yes

Resolution:

200

Infill:

70+

Filament brand:

Sanlv

Filament color:

grey

Filament material:

PLA

How I Designed This

How to make

A long time ago I saw a Raspberry Pi video, oh, here Raspberry Pi 3,4 - Gaming Case, and then I’m special I want to be a small computer of my own, I bought a Raspberry Pi and put it there to eat ashes, until I saw this Mini Raspberry Pi Server With Built In UPS, I have watched the video, but this file is chargeable, and I found that many people are saying why not speak from below, I was thinking , This attention is really good. Mini Desktop Case for Raspberry Pi 4 with Makerbase "UPS" 18650 Power Supply, I have seen this too, but I found out that it needs screws assemble, and it’s not It's transparent enough.

Feeling the inspiration they gave me, I started designing by myself. All the parameters are measured and printed again and again by myself, and then recalibrated. You can see my picture, the long row, all failed or there is questionable.

The initial design was that the oled and micro sd card were placed in the front, and it was found that the radiator and the oled would conflict, and then the position was adjusted.

At the beginning, the battery at the bottom could not be taken out. I knew that once the UPS Plus could not be shut down inexplicably, pressing the side switch did not work. There were indeed some problems. Then I quickly mentioned the function of taking the battery to emergency. If this problem occurs next time, I will have to remove all the screws and try again. It is really troublesome.

« 관절 뱀(Articulated Snake v8 (bigger head))

겹쳐서 쌓을 수 있는 보관 바구니(Stackable Storage Caddies) »

목록보기