메뉴 닫기

모듈식 마운팅 거치대(Modular Mounting System)

gopro gopro · 2021-06-23 09:30 · 조회 2247 · 생활용품
작업프로그램
기타(etc)
라이선스
CC BY(저작자표시)
제작여부
출처에서 가져옴
출처
싱기버스
기타
by HeyVye
조회수
2247
다운로드
12
파일명
ModularMountingSystem.zip
상세정보

출처 : https://www.thingiverse.com/thing:2194278


휴대폰이나 소형 카메라와 같은 경량 물체를 장착하는 시스템. 조인트는 GoPro 마운트와 호환



Summary



This project is a mounting system for lightweight objects such as phones and small cameras. The joint is compatible with GoPro mount.

Phone clamp assembly video: " rel="nofollow">

If you find this design helpful, consider image to support my work. Thanks in advance.

UPDATE [2020-11-15]:

- Updated holder for phone clamp so it can swap orientation.

UPDATE [2020-11-18]:

- New M5 knobs. More tolerance on Phone clamp.

- Be sure to read the description before ask questions in comment area.

FEATURES:

  • It is designed to be modular to provide flexible use. The system has potential to mount most phones and small cameras onto a wide range of objects. Using same parts printed for different purpose is the major approach.
  • The included phone clamp can grab phones very firmly. And it is suitable for phones from about 55mm wide to 95mm wide (iPhone 4 - iPhone 12 Pro Max and bigger). The clamp hook was angled so it won't be able to reach and accidentally press the buttons on the side of phone.
  • The modules can be used with GoPro compatible equipment. The bolts and nuts included in the design are standard M5. It's hightly recommended to use metal bolts and nuts for the arm. There is also a printable version if anyone is interested to try out.
  • With this modular system, I will be developing new add-ons to it. Feel free to watch this thing. Many of the objects designed for GoPro are already usable for this setup. If anyone wants to make remix, STEP files are available here.

ACHIEVED APPLICATIONS:

  • Phone/Camera/GoPro mount
  • Desk clamp for phone/camera.
  • Stand for phone.
  • Headphone stand.
  • And much more applications in REMIX section of original page.

MAKING:

  • It is highly recommended to print with complete support interface for the parts in this project. Support interface would give a flat bottom which result in a better mechanical performance.
  • The orientation of stl files are already thought through during my testing. Try printing at the current orientation unless you run into problems. It is not recommended to reorient the arms to save support material. The tabs will be easy to break if printed otherwise.
  • The bolt is oriented horizontally for optimised strength. Bottom teeth is trimmed off for printing easily. It acts very similar to a full thread. Only the phone clamp bolt (M5x65) is recommended to use printed version. All the bolts for arms should be metal if possible.

NOTES:

  • It is not recommended to extend the arm too long. General filament is not strong enough to take that much lateral load at this size and the arm would be very wobbly. And the arms are optimized to stay still. If you wish to use this design as selfie stick or similar purpose, please be careful with the material strength and use at you own risk.

ACKNOWLEDGEMENTS:

USEFUL PARTS

MOUNT BASES:

OBJECT MOUNT:

OTHER TYPES CONNECTIONS:

OTHER KNOBS:

UPDATE HISTORY

  • 22/03/17 - The phone clamp knob originally uploaded has issue of screw poping out of knob instead of knob pulling the clamp out. A new knob named "M5 knob for phone v2 tighter" with smaller hole is uploaded for the socket to firmly grab the bolt. "Phone clamp down nongrab" is an old backup version which the clamp doesn't pull out while unscrewing the knob.
  • 02/04/17 - More variation of arms. Added more tolerance to the arms.
  • 13/04/17 - A holder that grabs the phone clamp less tight. (Phone clamp holder v2)
  • 20/04/17 - After a period of use, the printed bolts or nuts start to give up, especially the nuts, not able to lock the arms in place. They are more like a temporary solution. I would buy metal bolts to replace them.
  • 24/04/17 - New version of the knob for phone clamp. More convenient to twist. Smaller diameter. (M5 knob for phone v3)
  • 26/04/17 - New version of the knob for the joints with smaller diameter. The long knob is no longer needed. (M5 knob short v3)
  • 09/05/17 - Longer M5x65 bolt for wide phones larger than 5.5 inch. (M5x65_D)
  • 18/05/17 - Mount for lightweight cameras. (Camera Mount & Camera Screw)
  • 18/05/17 - Moved the position of the nut in phone clamp, making it extend 10mm longer with M5x65 bolt. (Phone clamp down v3)
  • 18/05/17 - Slightly more tolerance to holes for bolt. Minor change.
  • 04/06/17 - New version of the knobs with better grip. (M5 knob short v4, M5 knob for phone v4)
  • 31/08/17 - New C clamp with the same width as the arms, not requiring support.
  • 14/02/18 - 4mm thicker phone clamp for phones with case. (Phone_clamp_down_4mm_thicker, Phone_clamp_up_4mm_thicker)
  • 25/04/18 - Headphone stand attachment. (headphone holder.stl)
  • 27/07/19 - V5 major update. Better aesthetics, better tolerance. Stronger C-Clamps.
  • 20/03/20 - Rotating Holder removed. Not reliable enough in long term.
  • 19/10/20 - M5 bolts updated. Thread made deeper. Less likely to strip.
  • 10/10/20 - The phone clamp is updated with a better knob with no chance of bolt popping out. New printed bolt without support and threaded knobs.
  • 15/10/20 - Updated holder for phone clamp so it can swap orientation.
  • 18/10/20 - New M5 knobs. More tolerance on Phone clamp.