메뉴 닫기

여행용 행거

가즈아 가즈아 · 2020-04-28 14:38 · 조회 3899 · 생활용품
작업프로그램
기타(etc)
라이선스
CC BY-NC-SA(저작자표시-비영리-동일조건변경허락)
제작여부
출처에서 가져옴
출처
thingiverse
기타
by francfalco
조회수
3899
다운로드
10
파일명
Folding_travel_coat_hanger.zip
상세정보

Folding travel coat hanger (http://www.thingiverse.com/thing:2533076) by francfalco is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
http://creativecommons.org/licenses/by-nc-sa/3.0/

 

# Summary

Inspired by an existing design - my 3d printable version of a folding travel coat hanger.

Just what you need when travelling. Light enough to pack in your case.
Particularly useful if you want to rinse out clothes when you are away or just hang stuff up.

2 configuration options for children or adult clothes.
Also includes a belt, tie, dress, light weight trousers hanging ability.



Enjoy!

UPDATE:
22/09/17
Added a v2 set - different hinge design which may suit some printers better.

# Print Settings

Printer Brand: Ultimaker
Printer: Ultimaker 2
Rafts: Yes
Supports: Yes
Resolution: 0.1
Infill: 50% or higher

Notes:
I've printed this version in standard PLA and its does seem stable, but I'll see longterm how the pivot joints hold up?
ABS, Nylon or other more stable materials may be more appropriate?.
The tolerance of the clip fit pivots are going to test the set up of your printer to the max!
Over extrude and the parts won't 'clip' together.
Under extrude and it'll all be too loose!

Print 2 x parts:
Folding_coat_hanger_E.stl
Folding_coat_hanger_M.stl (supports needed)

The updated files of v2 have a peg and hole joint design. These joints should be firmly, but carefully 'wiggled' together until the peg clips into the hole - support the walls of the parts as you go.