테슬라 사이버트럭(Tesla Cybertruck)

살림남 · 2022-09-16 11:01 · 조회 773 · 미니어처

작업프로그램

기타(etc)

라이선스

CC BY(저작자표시)

제작여부

출처에서 가져옴

출처

싱기버스

기타

by wov

조회수

773

다운로드

파일명

4063298_Tesla_Cybertruck.zip

상세정보

출처: https://www.thingiverse.com/thing:4063298

Summary

3D print your favourite electric truck for less then your pre-payment of the real thing you will have to wait for quite some time. All parts are printed without support. Wheels are spinning if you use the right parts, which are listed below. Tyres are printed from TPU, all other parts PLA or any other material of your choice.

Overall length (if you don't scale the model): 196 mm / 7,7"

Scale: 1:30

8x brass insert M3 ruthex

4x M3x6 (chassis and body)

4x M3x14 (wheels)

4x polyamide washer (wheels)

superglue (for windows)

loctite (wheel screws)

This is a remix from Greg Bejtlich's 3D model on grabcad.com

amazon (EU) insert M3: https://www.amazon.de/Gewindeeinsatz-Gewindebuchsen-Einpressmutter-Kunststoffteile-Ultraschall/dp/B07YSRGZ9N/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ruthex+m3&qid=1587704029&sr=8-5

amazon (US) insert M3: https://www.amazon.com/dp/B00Y20YLKY/ref=cm_sw_r_tw_dp_U_x_GCduEbP665W7R

Jan., 12th, 2020: updated "black_chassis_front.stl" with more clearance for AT tyres

Jan., 19th, 2020: updated "black_chassis_rear.stl" and "silver_body_rear.stl" to fix the imperfection where the wall thickness on the old body part at one spot near the rear wheel well was so small that there would be a hole after printing. The hole can be seen on some of the pictures. Your model will not have that if you download the new files.

March 8th, 2020: fixed un-attached geometry on AT tyres left/right

April 17th, 2020: fixed un-attached geometry on black_chassis_front

Print Settings

Printer:
Prusa i3 Mk3

Rafts:
No

Supports:
No

Resolution:
0.2 mm

Infill:
8%

Filament brand:
any

Filament color:
silver / matte black

Filament material:
PLA / TPU