키홀더(KEY HOLDER)

란쯔 · 2021-03-22 08:50 · 조회 2382 · 생활용품

라이선스

CC BY(저작자표시)

제작여부

출처에서 가져옴

출처

싱기버스

기타

by mpgreenough1986

조회수

2382

다운로드

파일명

KeyHolder.zip

상세정보

출처 : www.thingiverse.com/thing:4775253

Summary

Hi all,

Just a simple multilevel Hexagonal Key tidy.

There are 3 heights of key fob to match the varying heights of the holder. Below are the quantities of each you would need to print to fill the holder but I think it looks better if you leave some gaps

x4 - 15

x11 - 20

x4 - 25

Depending on your printer you may need to scale the print to fit on your bed.

Technically there should be a 0.1mm gap between the fob and the holder but I had a slight issue with the squish effecting the fit of the fobs into the holder so I scaled the fobs slightly more than the holder.

I scaled to;

Holder = 70%
Fobs = 68.5%

Just because I preferred the smaller fob size for the keyrings.

Update:

I have added a v2 holder to fit the 15mm key fobs. That way you can print all 15's.
I have also added a v2 with holes as i know someone mentioned mounting it on a wall.

Cheers

Print Settings

Printer:

Creality Ender 3

Rafts:

Supports:

Resolution:

0.16

Infill:

25%

Filament brand:

Amazon Basics

Filament color:

Any

Filament material:

PLA