메뉴 닫기

섬유 줄자 홀더(Fabric Tape Measure Holder (Rounded))

player player · 2023-02-10 10:12 · 조회 424 · 생활용품
1_Assembled_With_Tape.jpeg
2_Assembled.jpeg
4_Bottom.jpeg
5_Top.jpeg
6_Collar.jpeg
Fabric_Tape_Measure_Rounded_-_Build_Plate.png
작업프로그램
퓨전360(Fusion360)
라이선스
CC BY(저작자표시)
제작여부
출처에서 가져옴
출처
싱기버스
기타
by ZevEisenberg
조회수
424
다운로드
1
파일명
Fabric_Tape_Measure_Holder__Rounded__5804251.zip
상세정보

출처:https://www.thingiverse.com/thing:5804251


Summary




I loved the original design by dammitcoetzee, and made the following changes:
  • Rounded end caps and filleted edges make it more comfortable to hold and use.
  • Two-part design means both outer faces rest on the build plate, allowing the collar to slide smoothly against a glossy surface.
  • Tight-fitting collar removes the need for a bulky measuring tape. Even if your tape is thinner than mine, this should hold it in place.
  • Centered and symmetrical notch means you can insert the measuring tape from either end.
Print the two halves separately and then fit the pegs into the holes to assemble. In my tests with PLA, it was a nice fit and did not require glue, but you could use a little glue if you want.

The collar should slide on nicely, but for extra smooth sliding, slightly squeeze the sides of the collar that are closest to the tape when adding or removing it.





Print Settings


Printer brand:



Prusa




Printer:



I3 MK3S




Rafts:
No


Supports:
No


Notes:



⚠️ Print the “Build Plate” STL file. The “Assembled” file is just for reference.







Post-Printing






How I Designed This




Designed from scratch in Fusion 360, using the original dammitcoetzee model as reference and inspiration. Included f3d file in case you want to modify it.



« 무료 Tic-Tak-Toe 보드(Free Tic Tak Toe board and pieces)
탁상용 진공청소기 노즐[Vaccum Nozzles (Desk-Cleaner and extra long Tube)] »
목록보기